12v LOOM FOR CLASSIC VESPA WITH 12v PX ENGINE
YOU WILL ALSO NEED A 12v LIGHT SWITCH AND 12v BRAKE LIGHT SWITCH
1;?
3;SIDE LIGHTS OUT AND REAR LIGHT (BLACK)
4;YELLOW POWER IN
6;HIGH BEAM OUT
7;HIGH BEAM OUT
8; CUT OUT GREEN
TOP RIGHT HAND SIDE;WHITE HORN OUT (ABOVE 8)
HORN
RED IS POWER IN FROM REGULATOR
WHITE IS EARTH FROM THE LIGHT SWITCH
12v BRAKE LIGHT SWITCH (SPRINT/SUPER/VBB/RALLY/GS)
BLUE IS POWER IN FROM REGULATOR
BLUE IS POWER OUT TO REAR LIGHT
12v BRAKE LIGHT SWITCH FOR SMALLFRAME
BLUE IS POWER IN FROM REGULATOR
BLUE IS POWER OUT TO REAR LIGHT
REGULATOR
YELLOW IS POWER IN FROM ENGINE
YELLOW,RED AND BLUE ARE POWER OUT (YELLOW TO LIGHT SWITCH,BLUE TO BRAKE LIGHT SWITCH,RED TO HORN)
WHITE IS EARTH TO ENGINE
CDI
GREEN IS CUT OUT FROM LIGHT SWITCH TO CDI COIL
YELLOW IS POWER FROM ENGINE TO REGULATOR
WHITE IS EARTH FROM ENGINE TO REGULATOR or FRAME
REAR LIGHT
BLACK IS POWER FROM LIGHT SWITCH
BLUE IS POWER FROM BRAKE LIGHT SWITCH
12v LIGHT SWITCH WITH WIRES FROM LOOM
3;REAR LIGHT (BLACK)
4; POWER IN (YELLOW) FROM REGULATOR
8; CUT OUT (GREEN)
TOP RIGHT HAND SIDE (ABOVE 8) ;HORN OUT (WHITE)
SWITCH WITH WIRES (OUT) GOING TO BULB HOLDER
3;SIDE LIGHT OUT (BLACK)
6;HIGH BEAM OUT (RED)
7;HIGH BEAM OUT (BLUE)
SWITCH WITH ALL WIRES ADDED TO BULB HOLDER AND LOOM
1;?
3;SIDE LIGHT AND REAR LIGHT (BLACK)
4; POWER IN (YELLOW)
6;HIGH BEAM OUT (RED)
7;HIGH BEAM OUT (BLUE)
8; CUT OUT (GREEN)
TOP RIGHT HAND SIDE (ABOVE 8) ;HORN OUT (WHITE)
BULB HOLDER
SPRINT BULB HOLDER
RED; HIGH BEAM FROM SWITCH
BLUE; HIGH BEAM FROM SWITCH
BLACK; SIDE LIGHT FROM SWITCH
WHITE; EARTH TO FRAME OR HEADSET (NOT SWITCH)
RALLY BULB HOLDER
RED; HIGH BEAM FROM SWITCH
BLUE; HIGH BEAM FROM SWITCH
BLACK; SIDE LIGHT FROM SWITCH
WHITE; EARTH TO FRAME OR HEADSET (NOT SWITCH)
CONNECTERS
COMES WITH SPARE CONNECTERS SO ANY HEAD LIGHT AND REAR LIGHT CAN BE USED
LOOM WITH 4 PIN REGULATOR FOR BATTERY
A 12v BATTERY CAN BE USED IF YOU HAVE A 4 PIN REGULATOR
ALL YOU HAVE TO DO IS ADD A WIRE (RED) TO THE BATTERY FROM "A" ON REGULATOR
